Minggu, 14 November 2010

ccna 2.5 quiz


1.when configuring an ISR device using cisco SDM express wizard,what does setting the enable secret password field accomplish?
·         Ensures that authorization must be granted before accessing the internet
·         Blocks unauthorization users from accessing the LAN
·         Controls access to user executable mode
·         Controls access to privileged mode
2.when using cisco SDM,which WAN encapsulation type can be configured to require a username and password before a connection is granted?
·         High level data link control(HDLC)
·         Frame delay
·         Point to point protocol(PPP)
·         ATM PVC
3.what speed and duplex setting will result on a catalyst switch if it is set to auto negotiated to a 100Mbps port on a device that does not support auto negotiation?
·         10 half duplex
·         10 full duplex
·         100 half duplex
·         100 full duplex
4.which method can be used to configure a cisco catalyst switch before an IP address has been applied to the management interface?
·         Cisco IOS CLI using vlan 1
·         Cisco IOS CLI using console port
·         Cisco device manager using console port
·         Cisco software using vlan 1
5.what is a secure way that a client can connect to a device in band for the purpose of remote monitoring and administration?
·         telnet
·         HTTP
·         SSH
·         Console port
6.which type of wide area network(WAN) connection uses packet switched networks?
·         ISDN
·         Dial-up
·         Frame relay
·         Point to point
7.a small company with two office in the same building is requesting advice on WAN connections.which two questions would give a technician information to base a recommendation?(choose two)
·         What operation system is being used?
·         How much money has the customer budgeted to spend on the WAN connection?
·         What type of email client software is used by the employees?
·         Are the computers laptops or workstation?
·         Are the company web servers located in the building or at the ISP?
8.what is one fundamental difference between cisco’s CLI versus the SDM interface?
·         The SDM interface can be used with both in band out of band management
·         The CLI interface can be used with both in band and out of band management
·         The SDM interface requires a terminal emulation program on the PC
·         The CLI interface cannot be used over a telnet connection
9.which two statements describe the command history feature?(choose two)
·         It requires configuration of a history buffer before it can be used
·         It displays the most recently entered command strings in the current mode
·         It saves the output from the most recent show command
·         It displays the last five command that were entered in global configuration mode
·         It can be accessed by using the up and down arrows keys
10.which router mode displays a prompt of router#?
·         Global configuration mode
·         Privileged EXEC mode
·         Setup mode
·         User EXEC mode
11.in which two cases would out of band management of a router be required?(choose two)
·         When accessing a customer router ftom the ISP to monitor the normal operation
·         To access and configure the router before the ISP network is operational
·         To correct an error that has shutdown the network interfaces on a router
·         When the NAT translation configuration settings are incorrect
·         To back up the running configuration on the a tftp server
12.which two statements describe the result of entering the IP route 0.0.0.0 0.0.0.0 192.168.1.1 command on a router?(choose two)
·         The router is not able to reach the 192.168.1.0 network
·         All packets received by the router are sent to the address 192.168.1.1
·         The remote network 192.168.1.0 can be reached using any interface
·         A default static route is added to the routing table
·         If a route to a destination network is not known,the packet is sent to 192.168.1.1
13.click and drag the command on the left to the correct category on the right
Used to change router modes or sub modes
Configure terminal
Interface fastethernet 0/0
enable
Used by administrator to verivy or monitor router operation
Show ip route
Show interfaces
ping
Affect the operation of the network
Ip address 172.16.1.1 255.255.255.0
No shutdown

14.what is the purpose of assigning an IP address to the interface VLAN1 on the cisco switch?
·         To be able to telnet to the switch to manage and configure it
·         To enable the switch to route between network
·         To create a new IP local network on the switch
·         To permits IP packets to be forwarded by the switch




ccna 2.4 quiz

1.what are three advantages of NAT?(choose three)
·         Conserves  registered public IP addresses
·         Reduces CPU usage on customer routers
·         Creates multiple public IP addresses
·         Hide private addressing from the internet
·         Permits LAN expansion without additional IP address
·         Improves the performance of border router
2.what is the default subnet mask for the address  172.31.18.222?
·         255.0.0.0
·         255.255.0.0
·         255.255.255.0
·         255.255.255.254
·         255.255.255.255
3.which three address are valid subnetwork addresses when 175.25.15.0/24 is further subnetted by borrowing  an additional for bits(choose three)
·         172.25.15.0
·         172.25.15.8
·         172.25.15.16
·         172.25.15.40
·         172.25.25.96
·         172.25.15.248
4.where are the high order binary number  that begin a class c address
·         000
·         001
·         010
·         110
5.host A is configure with IP address 192.168.75.34 and host B is configured with IP address 192.168.75.50.each are using  same subnet mask of 255.255.255.240 but are not able to ping each other.what networking devices are needed for these two host to communicate?
·         Switch
·         Hub
·         Server
·         Router
6.what two pieces can be derived from the IP address 192.168.42.135/24(choose two)
·         This is a class c address because the high order bits are 110
·         The  default subnet mask is 255.255.255.0
·         The host portion is represented by the third and four octets
·         The seconds high order bits is a o so this is a class b address
·         The host address belong to the parent 192.168.0.0 network
·         This is one host address out of a possible 65,534 addresses
7.what subnet mask is indicated by the network address 172.16.4.8/18
·         255.255.0.0
·         255.255.192.0
·         255.255.240.0
·         255.255.248.0
·         255.255.255.0
8.click and drag the IP address on the left to the appropriate description on the right
223.14.6.95
127.0.0.0
191.82.0.0
224.100.35.76
61.0.0.255
255.255.0.0
124.255.255.255
9.the web server S2  needs to be accessible from the internet.which NAT option will provie a method for outside host to access S2 ?
·         Dynamic NAT  using a NAT pool
·         Static NAT
·         Port address translation
·         Dynamic NAT with overload
10.when a network administrator apllies the subnet mask 255.255.255.248 to a class B address,for any given subnet,how many IP addresses are available to be assigned to devices?
·         6
·         30
·         126
·         254
·         510
·         1022
11.an ISP customer has obtained a class C network address.the network technician needs to create five usable subnets,with each subnet capable of containing at least 20 host addresses.what is the appropriate subnet mask to use?
·         255.255.255.0
·         255.255.255.192
·         255.255.255.224
·         255.255.255.240
12.click and drag the characteristic on the left to the correct IP version on the right
IPv4
Is usually expressed in dotted  ecim al notation
Is in widespread use on the internet
Uses a 32-bit address
IPv6
Contains a 24-bit global previx
Is usually expressed in hexadecimal notation
Uses a 128-bit address


ccna 2.3 quiz


1.what three types of network documentation does a technician need to complete before designing a new network?(choose three)
  • Cut sheet
  • Inventory sheet
  • Site survey report
  • Standards evaluation
  • Topology maps
  • Upgrade initiative
2.what should the on-site technician to immediately after completing the site survey?
  • Begin scheduling the work for the network upgrade
  • Order the networking devices and software required
  • Review the survey results with the network designer
  • Review the survey results with the customer to ensure accuracy
3.which three step must be completed before implementation of new network can begin?(choose three)
  • The network is brought into a production environment
  • Projected designs and costs are compared with actual development
  • Prototypes are created and tested
  • An analysis report is generated
  • The design is approved by the customer
  • The operation of the network upgrade is monitored
4.what two characteristics of horizontal cabling?(choose two)
  • It terminates at a face plate in the user work area
  • It connects directly to a switch or router in the MDF
  • It terminates at a patch panel in the IDF or MDF
  • It connect two networking devices located in different IDFs
  • It connects the PC to the face plate
5.when designing a structures cable project,why is it important to obtain an accurate floor plan?(choose three)
·         To design the layer 3 adressing
·         To share the conduit with existing electrical wiring
·         To identify possible wiring closet locations
·         To determined the number of host devices needed
·         To avoid areas with eklectrical equipment or wiring
·         To estimate how much cable will be required
6.click and drag the cable type on the left to the appropriate description on the right
Vertical cable
Cable containment system
Patch cable
Horizontal cable

7.why is important to consider the failure domains when upgrading a network?
  • Creating large failure domains reduce the number of IP broadcast domain
  • Small failure domains reduce the number of user affected when the network device malfunction
  • Large failure domains usually improve the reliability and reduce downtime
  • It requires fewer networking devices to create small failure domain than large ones
8.why would a managed service customer want to have an SLA on the ISP?
  • To ensure that equipment ordered from vendors is delivered on the time
  • To provide extended warranties to customer installed networking equipment
  • To guarantee customer premises wiring meets all required standard
  • To have a written agreements of what service the ISP will provide
9.where would the on-site technician record information about the brand,model and operating system of  the host and networking devices installed on the network?
  • Topology map
  • Inventory sheet
  • Office floorplan
  • Analysis report
10.an ISP is recommending a cisco 1841 ISR to upgrade a small bussines customer LAN.why is an ISR a good choice for a small business customer?(choose two)
  • An ISR often cost less than a stand alone router and a LAN switch solution
  • The ISR eliminates the need for on site email or web server
  • ISRs combine routing,switching and wireless capabilities in a single device
  • ISR are good choice because small business usually do not require firewall security
  • Because the ISR feature are limited to routing and switching,they are easier to configure