Rabu, 10 November 2010

lab activity 1.2.3


Tujuan• Jalankan utilitas Windows tracert dari komputer host lokal untuk sebuah website di benua yang berbeda.• Interpretasikan output traceroute untuk menentukan ISP paket melewati perjalanan mereka dari host lokal ke situs tujuan.• Gambarkan diagram jalur traceroute, yang menunjukkan router dan ISP awan melewati dari host lokal ke website tujuan, termasuk alamat IP untuk setiap perangkat.Latar Belakang / PersiapanDalam kegiatan ini, Anda akan menggunakan utilitas tracert Windows untuk konektivitas internet peta antara Anda ISP lokal dan ISP lain yang digunakan untuk menyediakan akses internet global. Anda juga akan konektivitas peta utama internet berikut Daerah Registries (RIR). Namun, instruktur Anda dapat memilih situs tujuan yang berbeda.• AfriNIC (African Network Information Centre) - Wilayah Afrika• APNIC (Asia Pacific Network Information Centre) - Asia / Pasifik• ARIN (American Registry untuk Internet Numbers) - Wilayah Amerika Utara• LACNIC (regional Amerika Latin dan Karibia IP Address Registry) - Amerika Latin dan beberapa Kepulauan Karibia• RIPE NCC (Réseaux IP Européens) - Eropa, Timur Tengah, dan Asia TengahKegiatan ini dapat dilakukan secara individual, berpasangan, atau dalam tim. Hal ini dapat dilakukan sebagai suatu kegiatan di kelas atau sebagai pekerjaan rumah, tergantung pada apakah kelas komputer memiliki akses ke Internet.Sumber berikut diperlukan:• Host komputer dengan sistem operasi Windows• Akses ke command prompt• Koneksi internet• Rute menelusuri lembar kerja untuk setiap URL tujuan. worksheet melekat ke laboratorium ini. Setiap siswa menyelesaikan lembar kerja mereka sendiri dan memberikannya ke instruktur.• Global Konektivitas Peta, yang melekat pada akhir laboratorium ini• Akses ke prompt perintah PC
Langkah 1: Jalankan utilitas tracert dari komputer hosta. Pastikan bahwa komputer host memiliki koneksi ke Internet.b. Buka jendela Command Prompt dengan mengklik Start> Run dan ketik cmd. Atau, Anda bisa mengklik Start> All Program> Accessories> Command Prompt.c. Pada tracert, prompt ketik dan website tujuan pertama Anda. output akan terlihat seperti berikut:
d. Simpan output tracert dalam sebuah file teks sebagai berikut:1) Klik kanan title bar dari jendela Command Prompt dan pilih Edit> Select All.2) Klik kanan title bar dari jendela Command Prompt lagi dan pilih Edit> Salin.3) Buka program Windows Notepad: Start> All Programs> Accessories> Notepad.4) Untuk menyisipkan output ke Notepad, pilih Edit> Paste.5) Pilih File> Save As dan menyimpan file Notepad ke desktop Anda sebagai tracert1.txt.e. Jalankan tracert untuk setiap situs tujuan dan menyimpan output dalam file berurutan nomor.f. Jalankan tracert dari jaringan komputer yang berbeda, misalnya, dari perpustakaan umum atau dari komputer seorang teman yang mengakses Internet menggunakan ISP yang berbeda (untuk instan kabel bukannya DSL). Simpan salinan output yang di Notepad dan mencetaknya untuk referensi di kemudian hari.
Simak
Baca secara fonetik
  Langkah 2: output tracert Menafsirkan untuk menentukan konektivitas ISPRute ditelusuri akan melalui banyak hop dan beberapa ISP yang berbeda tergantung pada ukuran dari ISP dan lokasi sumber dan host tujuan. Pada contoh output ditunjukkan di bawah ini, paket tracert perjalanan dari PC sumber ke default gateway lokal router ke ISP Point of Presence (POP) router dan kemudian ke Internet Exchange Point (IXP). Dari sana mereka melewati dua Tier 2 router ISP dan kemudian meski beberapa router Tier 1 ISP saat bergerak melintasi tulang punggung Internet. Ketika mereka meninggalkan Tier 1 backbone ISP, mereka bergerak melalui lain Tier 2 ISP dalam perjalanan ke server tujuan di www.ripe.net.
a. Buka file output pertama traceroute dan menjawab pertanyaan-pertanyaan berikut.1) Apa adalah alamat IP dari router lokal POP Anda? (64.180.160.254)________________________________________________________________________2) Berapa banyak hop traceroute melakukan paket diambil selama perjalanan dari komputer host ke tujuan? ____(13 hop)________________________________________________________________ 
3) Berapa banyak yang ISP yang berbeda paket traceroute melewati perjalanan dari komputer host ke tujuan? _________(3 perbedaan)_____________________________________________________
 4) Daftar alamat IP dan URL dari semua perangkat di output traceroute dalam urutan seperti yang terlihat pada lembar kerja Rute dilacak. 
5) Pada kolom Pemilik Jaringan worksheet, mengidentifikasi ISP memiliki setiap router. Jika router milik LAN Anda, menulis "LAN". Dua yang terakhir bagian dari URL menunjukkan nama ISP. Sebagai contoh, sebuah router yang memiliki "sprint.net" dalam URL-nya milik jaringan ISP yang disebut Sprint. 
6) Apakah lulus traceroute melalui router yang tidak teridentifikasi antara dua ISP? Ini mungkin merupakan IXP. Jalankan perintah whois utilitas atau fungsi whois program traceroute visual untuk mengidentifikasi kepemilikan router itu. Atau, buka http://www.arin.net/whois untuk menentukan kepada siapa IP yang ditetapkan.b. Lengkapi lembar kerja menggunakan file output traceroute untuk setiap URL tujuan lain.c. Bandingkan hasil anda dari file output yang berbeda traceroute. Apakah Anda ISP terhubung ke ISP yang berbeda untuk mencapai tujuan yang berbeda? ______________________________________(tidak)____________________________________ 
d. Jika anda telah menjalankan traceroute dari jaringan komputer yang berbeda, periksa output untuk file traceroute juga. Apakah jumlah hop yang berbeda untuk mencapai tujuan yang sama dari ISP lokal yang berbeda? ISP yang mampu mencapai tujuan dalam sedikit hop? ___________________________________(tidak), ISP tujuan (destination of ISP network)______________ 
Langkah 3: Peta konektivitas dari ISPa. Untuk setiap output traceroute, menggambar diagram pada selembar kertas terpisah menunjukkan bagaimana Anda ISP lokal interkoneksi dengan ISP lain untuk mencapai URL tujuan, sebagai berikut:1) Tampilkan semua perangkat secara berurutan dari router LAN ke server situs tujuan. Label semua perangkat dengan alamat IP mereka.2) Gambarkan kotak sekitar router POP lokal yang Anda identifikasi, dan label kotak "POP".3) Gambar sebuah awan ISP di semua router yang memiliki satu sama ISP, dan label awan dengan nama ISP.4) Gambarkan kotak sekitar setiap router IXP yang Anda identifikasi, dan label kotak "IXP".b. Gunakan Global Konektivitas Peta untuk membuat gambar gabungan hanya menampilkan awan ISP dan kotak IXP.
dapat dilihat dari gambar:
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEix_gn9g45oyTWMuUhiTsPEEGjLP6WkwN9X7sQvkmrCWJCtVrfcay5uSlzfd0Oq00k3p-6r1CDzhoUFlLY8ApYckQlHBRtcXiTfitgttzqAUWRAyx8dF__-ubK_15X7Tkq3oM7GcolPrJE/s320/4.bmp

Global Connectivity Map
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj2W79LOTXK12PFv5VsyZaqrlTjRbyQQpLCDvv8v-rrX4s7rDZmmTrOy8Cyuomi8Vgp7tHqLxHptFtOUhQVBHYsOit2c4k80Mht_crBojuzcBV4aFzQb2FahwmzrA_HlkOU_u0ISo8MBW0/s320/5.bmp




https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiZW_WZGV5RILXgSWkFpaWTlL-kc35PPe77Wd9mdHYjF0W10MFLS0ZLceYlhaou3YpZZQYuIXubtrgddAgAQmp1nTRTuKJJXFdT7N1uKJ8tzeAZ9TPG-ZO0EZ_8UVatTsT9Kcl5rmdpbDQ/s320/1.bmp
Tujuan• Gunakan Wireshark untuk menangkap paket data protokol saat mereka menyeberangi jaringan.• Gunakan Wireshark untuk menganalisis data protokol paket dari hasil ditangkap.
Latar Belakang / PersiapanLaboratorium ini berfokus pada konfigurasi dasar router Cisco 1841 atau sebanding menggunakan perintah Cisco IOS. Informasi dalam laboratorium ini berlaku untuk router lain, namun sintaks perintah mungkin berbeda. Cisco Catalyst 2960 saklar datang dikonfigurasi sebelumnya dan hanya perlu diberi informasi keamanan dasar sebelum terhubung ke jaringan.Sumber berikut diperlukan:• Cisco 2960 switch atau saklar sebanding lainnya• Dua router Cisco 1841 atau sebanding dengan minimal satu seri dan satu interface Ethernet cepat• Dua PC berbasis Windows, satu dengan program emulasi terminal. Gunakan satu PC sebagai tuan rumah, dan menggunakan yang lain sebagai server.• RJ-45-to-DB-9 konektor kabel konsol untuk mengkonfigurasi router• Dua lurus-melalui kabel Ethernet• Satu crossover Kabel Ethernet• Akses ke prompt perintah PC• Akses ke jaringan PC konfigurasi TCP / IP
CATATAN: Pastikan bahwa semua router dan switch telah dihapus dan tidak memiliki konfigurasi startup. Jika Anda memerlukan petunjuk, lihat akhir laboratorium ini. Instruksi disediakan untuk kedua saklar dan router.Langkah 1: Hubungkan router dan mengkonfigurasia. Menghubungkan kedua router dengan kabel serial. RouterA akan memberikan sinyal clocking antara dua router. S0/0/0 Gunakan pada kedua router untuk menghubungkan mereka.b. Gunakan RIP sebagai protokol ketika mengkonfigurasi kedua router. Iklan jaringan yang sesuai pada setiap router.c. Hubungkan Fa0 / 0 pada RouterA dengan kabel crossover ke server menjalankan Server Discovery Live CD.d. RouterB akan menggunakan langsung melalui kabel dari Fa0 perusahaan / 0 dapat terhubung ke saklar melalui Fa0 / 1. Konfigurasi router seperti ditunjukkan dalam diagram topologi di atas.Langkah 2: Hubungkan host ke saklar dan mengkonfigurasiLangkah 3: konektivitas Verifikasi menggunakan pinga. Untuk memverifikasi bahwa jaringan berhasil disiapkan, ping dari host ke server.b. Jika ping tidak berhasil, memverifikasi koneksi dan konfigurasi lagi. Periksa untuk memastikan bahwa semua kabel adalah benar dan bahwa koneksi duduk. Periksa host, server, dan konfigurasi router.c. Apakah ping sukses? (ya)
Langkah 4: Peluncuran Wireshark CATATAN: Wireshark bisa di-download dari Internet di www.wireshark.org dan diinstal pada setiap host lokal. Jika ini tidak mungkin, Wireshark dapat dijalankan dari Discovery Live CD. Periksa dengan instruktur Anda untuk menentukan prosedur untuk mengikuti.a. Jika menjalankan Wireshark dari host lokal, klik dua kali pada icon untuk memulai aplikasi dan lanjutkan ke langkah d. Jika menjalankan Wireshark dari server Discovery, lanjutkan ke langkah b.b. Dari menu Start K pada desktop server, pilih Internet> Wireshark Network Analyzer.
c. Peluncuran Wireshark jika belum terbuka. Jika diminta untuk password, masukkan discoverit.d. Untuk memulai data capture, buka Options klik menu Capture. Dialog Pilihan menyediakan berbagai pengaturan dan filter yang menentukan berapa banyak lalu lintas data ditangkap.
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgiUyi_zIMCIoGt4o2YcEoNItO3lk816uWrgRbu8V3rKXvQC7P3ljTUSPZWbNpmFLk72PRovLia_X_uI2QZm7fmAW-mMVXjsuFgXTAeVBbiG25hh-Krptm1cicoHfmnFTSlNYX0y8YVJog/s1600/3.bmp

 e. Pastikan bahwa Wireshark diatur untuk memantau antarmuka yang benar. Dari daftar drop-down Interface, pilih adaptor jaringan yang digunakan. Untuk kebanyakan komputer, ini akan menjadi Ethernet Adapter terhubung.



https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg647WdVHG8QizNaEyIhbfoB9Xu8ZF9Q9VTkq6oUXtSbBK9mSOMHsKZm3_BfFp0CpnU8iJCWc7gEBAzq-GS4BMXVaq-TkfNzXfCJEfOjjRFWro2tpfOxMPqzZehWjF9HPe18JlLLG6t_Ro/s1600/4.bmp

 f. Selanjutnya, pilihan lain bisa diatur. Kedua opsi disorot di bawah ini adalah pemeriksaan senilai: Capture paket dalam modus promiscuous dan Aktifkan resolusi nama transportasi.

Simak
Baca secara fonetik
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiQ6R-fI0TVcqnSvtAP7hc9-f-E4rIRIh3w2XbY1EwIeozdlaj-qA-h8aYyfva-ZjkLyW7QeLekp-d5SybRmfxkPrOXnOFJZwiX4kTuPPfrwG3ytrrW5kaVtcs34-EiqI37SnUe6zfnavk/s1600/5.bmp



• Mengatur Wireshark untuk menangkap paket dalam modus promiscuous• Menetapkan Wireshark untuk resolusi nama jaringan• Klik tombol Start memulai proses menangkap data. Sebuah kotak pesan yang menampilkan kemajuan dari proses ini.• Buat beberapa lalu lintas yang akan diambil. Mengeluarkan ping dan tracert dari host dan menonton untuk routing update.
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjuVBA95_V-ZsNMtwsB0RSYjg0ZsnJM-YoCTQTmljcFQUc8KCbInzEzNUweDqfgTnBzuAolrMEiOPBZxR7uVQa6Lh1Qy9X73fhz8yygIf9UXVJqMhHNUVYg01hLJjcL-Dq1scDHvc8PrXY/s1600/6.bmp
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgvbXIz6NDG6wf319yABYkbAml-eMsptjeFBy3DgQ1GEJzu6X0u-d5haRMrm2qtp6EZtess4sNViIa-64Ns-HZhBTqyA510bmDmvZlIUN_V60co6FcgbBeMS8VuSPj5HTJi1cDUIdbCKM8y/s1600/7.bmp
   

• Klik op die knoppie Stop eindig die opname-proses. Die hoof skerm word vertoon.
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjMbv25cCeqtCSI5d9813tEl1WfW3g9YyODcNDSRbkyRfF4SQuK8sx7NpYrQQlTnP6nHtv89Jc7wFbU-JghjhJpH5rPEW_w-BBl_TerlYMekXXYJV7Gk8EJZawEO9Y2CXD65sbliylI4CRc/s320/8.bmp


• The PDU (atau paket) Daftar pane di bagian atas diagram menampilkan ringkasan dari setiap paket yang diambil. Dengan mengklik pada paket dalam pane ini, Anda mengendalikan apa yang ditampilkan dalam dua panel lainnya.• The PDU (atau paket) Rincian panel di tengah diagram menampilkan paket yang dipilih di Pane Daftar paket lebih terinci.• The PDU (atau paket) Bytes pane di bagian bawah diagram menampilkan data aktual (dalam bentuk heksadesimal mewakili biner aktual) dari paket yang dipilih dalam panel Daftar Packet, dan menyoroti bidang yang dipilih dalam jendela Rincian paket.Daftar Packet PaneSetiap baris dalam panel Daftar paket sesuai dengan satu PDU atau paket data yang ditangkap. Jika Anda memilih jalur dalam pane ini, rincian tambahan ditampilkan dalam Packet dan Bytes Rincian Packet panel. Contoh di atas menunjukkan PDU ditangkap ketika utilitas ping digunakan dan http://www.Wireshark.org diawasi. Paket nomor 1 dipilih dalam pane ini.Rincian Paket PanePane Packet Details menunjukkan paket saat ini (dipilih dalam panel Daftar Packet) dalam bentuk yang lebih rinci. panel ini menunjukkan protokol dan protokol bidang paket yang dipilih. Protokol dan bidang paket ditampilkan menggunakan pohon, yang dapat diperluas dan runtuh.
Packet Bytes PanePane Packet Bytes menunjukkan data dari paket saat ini (dipilih dalam panel Daftar Packet) dalam apa yang dikenal sebagai gaya "hexdump". Pada lab ini, pane ini tidak akan diperiksa secara detail. Namun, ketika sebuah analisis yang lebih mendalam diperlukan, informasi yang ditampilkan ini sangat berguna untuk memeriksa nilai biner dan isi PDU.Informasi yang ditangkap untuk PDU data dapat disimpan dalam file. File ini kemudian dapat dibuka di Wireshark untuk analisis masa depan tanpa perlu untuk merebut kembali lalu lintas data yang sama lagi. Informasi yang ditampilkan ketika file capture dibuka adalah sama dengan menangkap asli.Saat menutup layar data capture atau keluar Wireshark, Anda diminta untuk menyimpan PDU ditangkap.
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiu9ktDRYEV-4FHyK1PbOP84PZYRlLWK2kaxvJPda_7b6lHVw0od8vnWHyOc_XaEaDHjG-b3YNzAg4AdbnL9q10D3S0QoQFVz7aDb02G2ddigIZ7MBu_Y2uXub68zbVPxItEZy-23mvJUmD/s1600/9.1.bmp


Langkah 5: PDU Ping Capturea. Peluncuran Wireshark.b. Mengatur Pilihan Capture seperti yang dijelaskan pada Langkah 4 dan memulai proses ambil.c. Dari baris perintah dari host, ping alamat IP dari server pada ujung topologi lab. Dalam hal ini, ping Server Discovery Live CD dengan menggunakan perintah ping 172.17.1.1.d. Setelah menerima balasan berhasil ping di jendela command-line, menghentikan capture paket.Langkah 6: Memeriksa panel Packet Daftara. Daftar paket panel pada Wireshark sekarang harus terlihat seperti ini:
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi46mmw0OxT6H8plbLyirTxIKbbGybnfs9D2IO5D-Q47uUviKl8bQ1-FEQCaDrHy3OjNM1X7A9MkzfEiGzwzqH8MEjjlQl2gFXKeC8q35XeLVzvBj0tO-QSbR94ybogo6WKE5UZ2TKvicZr/s320/9.bmp

b. Lihatlah paket yang terdaftar, kami tertarik pada paket nomor 3 sampai 10.c. Cari paket setara pada daftar paket pada komputer Anda. Jumlah mungkin berbeda.d. Dari Daftar Packet Wireshark, menjawab pertanyaan-pertanyaan berikut:1) Apakah protokol yang digunakan oleh ping? ______CDP_____________________________2) Apa nama protokol penuh? ______cdp_____________________________3) Apa nama dari dua pesan ping? __________reply_________________________ Dan4) Apakah sumber yang tercantum dan alamat IP tujuan yang Anda harapkan? ____cisco_79:f3:80 (ya)_________5) Mengapa? karena, menghasilkan pesan Reply tanda terhubung.
Langkah 7: Memeriksa paket Detail panela. Pilih (sorot) yang pertama echo paket permintaan pada daftar dengan mouse. Panel Packet Detail akan menampilkan sesuatu yang mirip dengan ini:
...

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjT4XbHTtE_bGUHm28FhbA0fzt9QiXpGLG49ajiiN17cXArepLWexWfmNHNM1ciaAeN8OdQYu8FnXv-48avNaugM1YIPysvcFpSsG_vQbRVOcX3sjzOABZrgq-p50UwU60IZio0LfTJUenZ/s320/10.bmp

Kamis, 04 November 2010

ccna discovery 2.3

CCNA Discovery 2 Module 3 Exam Answers Version 4.0
1. Which two benefits can be gained by locating network equipment in a telecommunications closet, rather than in a user area? (Choose two.)
• faster communication speeds
• IMPROVED PHYSICAL SECURITY
• more resistant to hacker attempts
• CENTRALIZED CABLE MANAGEMENT
• less electrical usage

2. Which three issues should be noted on the technician's site survey report? (Choose three.)
• UNLABELED CABLES
• only two power outlets per wall in each room
• POOR PHYSICAL SECURITY OF NETWORK DEVICES
• horizontal cabling runs under 100 meters
• LACK OF UPS FOR CRITICAL DEVICES
• two users sharing the same computer

3. Which two types of cable are used for initial router configuration? (Choose two.)
• serial cable
• ROLLOVER CABLE
• straight-through cable
• crossover cable
• patch cable
• CONSOLE CABLE

4. In addition to the inventory sheet, what other information about the hosts and networking equipment should be documented by the on-site technician while performing the site survey?
• any obsolete office equipment being stored
• all product keys for site license software
• ANY PLANNED GROWTH ANTICIPATED IN THE NEAR FUTURE
• the memory requirements for installed application software

5.

Refer to the exhibit. What type of device is used to connect two networks?
• hub
• ROUTER
• switch
• access point

6. It is said that the goal for availability of a communications system is "five-9s". What is meant by this?
• A down time of .00001% is unacceptable.
• A NETWORK NEEDS TO BE AVAILABLE 99.999% OF THE TIME.
• Five percent of all network expense covers 99% of user requirements.
• The most critical time for network availability is from 9:00 to 5:00 p.m. five days a week.
• The best time to do maintenance on a network is from 5:00 p.m. to 9:00 a.m. five days a week.

7. What three things are included in a logical topology document? (Choose three.)
• the location of cables, computers, and other peripherals
• THE PATH THAT THE DATA TAKES THROUGH A NETWORK
• the wireless signal coverage area
• the wiring closet and access point locations
• THE DEVICE NAMES AND LAYER 3 ADDRESSING INFORMATION
• THE LOCATION OF ROUTING, NETWORK ADDRESS TRANSLATION, AND FIREWALL FILTERING

8. Which device has the ability to break up broadcast and collision domains?
• repeater
• hub
• ROUTER
• switch

9. Why is it important to review the results of an on-site survey report with the customer before beginning the network design?
• to inform the customer of how much time the upgrade will take
• to discuss the implementation schedule for the new equipment
• TO VERIFY THAT THE REPORT ACCURATELY DESCRIBES THE CURRENT NETWORK AND ANY PLANS FOR EXPANSION
• to layout the new network design and discuss possible equipment upgrades and replacements

10. A client requires a networking device that is capable of expansion to suit growing network demands. What type of device will suit this requirement?
• a networking device with ports that can be activated and deactivated
• A NETWORKING DEVICE WITH A MODULAR PHYSICAL CONFIGURATION
• a networking device with the ability to be turned off remotely
• a networking device with a cost per port that is as high as possible

11. What does the use of redundant network components supply to a network?
• scalability
• manageability
• compatibility
• RELIABILITY

12. What is the benefit for a company to use an ISR router?
• AN ISR PROVIDES THE FUNCTIONALITY OF A SWITCH, ROUTER, AND FIREWALL IN ONE DEVICE.
• ISRs use a PC operating system for routing traffic, thus simplifying configuration and management.
• An ISR is immune to security attacks by hackers and so replaces all other network security measures.
• ISRs make routing decisions at OSI Layer 7, thus providing more intelligence to the network than do other routers.

13. Which three items are typically found in an MDF? (Choose three.)
• user workstations
• SWITCHES AND ROUTERS
• fax machines
• NETWORK EQUIPMENT RACKS
• THE POINT OF PRESENCE
• copier

14. What are two advantages of having ISP-managed services? (Choose two.)
• does not require leasing costs for service
• CAN GUARANTEE UP TO 99.999% AVAILABILITY
• eliminates the need for data backup
• INCREASES AVAILABILITY OF HELP DESK SERVICES
• does not require a Service Level Agreement

15. A manufacturing company is in the process of a network upgrade. Which two statements are true about the phases of the upgrade process? (Choose two.)
• PHASE 1 IS USED TO DETERMINE NETWORK REQUIREMENTS.
• Phase 2 includes creating an analysis report.
• PHASE 3 IS BASED ON AN IMPLEMENTATION SCHEDULE THAT ALLOWS EXTRA TIME FOR UNEXPECTED EVENTS.
• Phase 4 is where prototypes are created and tested.
• Phase 5 includes identifying and addressing any weaknesses in the design.

16. When designing a network upgrade, which two tasks should the onsite technician perform? (Choose two.)
• configure the servers and routers prior to delivery
• upgrade the network operating system and all client operating systems
• INVESTIGATE AND DOCUMENT THE PHYSICAL LAYOUT OF THE PREMISES
• document the final design for approval by the customer
• PERFORM A SITE SURVEY TO DOCUMENT THE EXISTING NETWORK STRUCTURE

17. What is the term for the location at the customer premise where the customer network physically connects to the Internet through a telecommunications service provider?
• backbone area
• POINT OF PRESENCE
• network distribution facility
• intermediate distribution frame

18.

to the exhibit. Which type of twisted pair cable is used between each device?
• A=console, B=straight, C=crossover, D= crossover, E=straight
• A=straight, B=straight, C=straight, D=crossover, E=console
• A=crossover, B=straight, C=straight, D=crossover, E=crossover
• A=CONSOLE, B=STRAIGHT, C=STRAIGHT, D=CROSSOVER, E=CROSSOVER
• A=console, B=crossover, C=crossover, D=straight, E=straight

19. In what two ways will entering into a managed service agreement with an ISP for a network upgrade affect the costs that are incurred by the customer? (Choose two.)
• Customer IT training costs will increase to enable operation of the new equipment.
• The cost of hardware repairs and support will become the responsibility of the customer.
• NETWORK UPGRADE AND MAINTENANCE COSTS WILL BECOME PREDICTABLE.
• Staffing costs will increase because the customer will need to hire additional IT staff to complete the upgrade.
• THE COMPANY WILL NOT NEED TO SPEND A LARGE AMOUNT OF MONEY TO PURCHASE THE EQUIPMENT UPFRONT.

20. Which type of cable has a solid copper core with several protective layers including PVC, braided wire shielding, and a plastic covering?
• STP
• UTP
• COAXIAL*
• fiber optic

21. What must be added when a network expands beyond the coverage area of the current telecommunications room?
• MDF
• POP
• IDF*
• IXP

ccna discovery 2.2

CCNA Discovery 2 Module 2 Exam Answers Version 4.0
1. Which two functions are provided by the upper layers of the OSI model? (Choose two.)
• placing electrical signals on the medium for transmission
• INITIATING THE NETWORK COMMUNICATION PROCESS
• encrypting and compressing data for transmission
• SEGMENTING AND IDENTIFYING DATA FOR REASSEMBLY AT THE DESTINATION
• choosing the appropriate path for the data to take through the network

2. Which is a function of the transport layer of the OSI model?
• routes data between networks
• converts data to bits for transmission
• delivers data reliably across the network using TCP
• FORMATS AND ENCODES DATA FOR TRANSMISSION
• transmits data to the next directly connected device

3. Which common Layer 1 problem can cause a user to lose connectivity?
• incorrect subnet mask
• incorrect default gateway
• LOOSE NETWORK CABLE
• NIC improperly installed

4. Which three command line utilities are most commonly used to troubleshoot issues at Layer 3? (Choose three.)
• PING
• a packet sniffer
• Telnet
• IPCONFIG
• TRACEROUTE

5. Which address is used by the router to direct a packet between networks?
• source MAC address
• destination MAC address
• source IP address
• DESTINATION IP ADDRESS

6. What is the correct encapsulation order when data is passed from Layer 1 up to Layer 4 of the OSI model?
• BITS, FRAMES, PACKETS, SEGMENTS
• frames, bits, packets, segments
• packets, frames, segments, bits
• segments, packets, frames, bits

7. What are two goals of the ISP help desk? (Choose two.)
• conserving support resources
• NETWORK OPTIMIZATION
• competitive scalability
• CUSTOMER RETENTION
• sales of network services

8. In what two ways do Level 1 and Level 2 help desk technicians attempt to solve a customer's problems? (Choose three.)
• TALKING TO THE CUSTOMER ON THE TELEPHONE
• upgrading hardware and software
• USING VARIOUS WEB TOOLS
• making an onsite visit
• installing new equipment
• WITH REMOTE DESKTOP SHARING APPLICATIONS

9. A customer calls the help desk about setting up a new PC and cable modem and being unable to access the Internet. What three questions would the technician ask if the bottom-up troubleshooting approach is used? (Choose three.)
• IS THE NIC LINK LIGHT BLINKING?
• What is the IP address and subnet mask?
• Can the default gateway be successfully pinged?
• IS THE NETWORK CABLE PROPERLY ATTACHED TO THE MODEM?
• IS THE CATEGORY 5 CABLE PROPERLY CONNECTED TO THE NETWORK SLOT ON THE PC?
• Can you access your e-mail account?

10. A customer calls to report a problem accessing an e-commerce web site. The help desk technician begins troubleshooting using a top-down approach. Which question would the technician ask the customer first?
• CAN YOU ACCESS OTHER WEB SITES?
• Is there a firewall installed on your computer?
• What is your IP address?
• Is the link light lit on your NIC card?

11. Which statement describes the process of escalating a help desk trouble ticket?
• The help desk technican resolves the customer problem over the phone and closes the trouble ticket.
• Remote desktop utilities enable the help desk technician to fix a configuration error and close the trouble ticket.
• After trying unsuccessfully to fix a problem, the help desk technician sends the trouble ticket to the onsite support staff.
• WHEN THE PROBLEM IS SOLVED, ALL INFORMATION IS RECORDED ON THE TROUBLE TICKET FOR FUTURE REFERENCE.

12. What are two functions of the physical layer of the OSI model? (Choose two.)
• adding the hardware address
• CONVERTING DATA TO BITS
• encapsulating data into frames
• SIGNAL GENERATION
• routing packets

13. A customer calls the ISP help desk after setting up a new PC with a cable modem but being unable to access the Internet. After the help desk technician has verified Layer 1 and Layer 2, what are three questions the help desk technician should ask the customer? (Choose three.)
• WHAT IS YOUR SUBNET MASK?
• WHAT IS YOUR IP ADDRESS?
• Is the NIC link light blinking?
• CAN YOU PING THE DEFAULT GATEWAY?
• Is the network cable properly attached to the cable modem?
• Is the network cable correctly connected to the network port on the PC?

14. Which scenario represents a problem at Layer 4 of the OSI model?
• An incorrect IP address on the default gateway.
• A bad subnet mask in the host IP configuration.
• A FIREWALL FILTERING TRAFFIC ADDRESSED TO TCP PORT 25 ON AN EMAIL SERVER.
• An incorrect DNS server address being given out by DHCP.

15. What are two basic procedures of incident management? (Choose two.)
• OPENING A TROUBLE TICKET
• using diagnostic tools to identify the problem
• surveying network conditions for further analysis
• configuring new equipment and software upgrades
• ADHERING TO A PROBLEM-SOLVING STRATEGY
• e-mailing a problem resolution to the customer

16. Which level of support is supplied by an ISP when providing managed services?
• Level 1
• Level 2
• LEVEL 3
• Level 4

17. What is the first step that is used by a help desk technician in a systematic approach to helping a customer solve a problem?
• identify and prioritize alternative solutions
• isolate the cause of the problem
• DEFINE THE PROBLEM
• select an evaluation process

18. A network technician has isolated a problem at the transport layer of the OSI model. Which question would provide further information about the problem?
• DO YOU HAVE A FIREWALL THAT IS CONFIGURED ON YOUR PC?
• Do you have a link light on your network card?
• Is your PC configured to obtain addressing information using DHCP?
• What default gateway address is configured in your TCP/IP settings?
• Can you ping http://www.cisco.com?

19. An ISP help desk technician receives a call from a customer who reports that no one at their business can reach any websites, or get their e-mail. After testing the communication line and finding everything fine, the technician instructs the customer to run nslookup from the command prompt. What does the technician suspect is causing the customer's problem?
• improper IP address configuration on the host
• hardware failure of the ISR used to connect the customer to the ISP
• bad cables or connections at the customer site
• FAILURE OF DNS TO RESOLVE NAMES TO IP ADDRESSES

20. Which layers of the OSI model are commonly referred to as the upper layers?
• APPLICATION, PRESENTATION, SESSION
• application, session, network
• presentation, transport, network
• presentation, network, data link
• session, transport, network

Rabu, 03 November 2010

ccna discoveri 2.1


CCNA Discovery 2 Module 1 Exam Answers Version 4.0
1. Which two things can be determined by using the ping command? (Choose two.)
• the number of routers between the source and destination device
• the IP address of the router nearest the destination device
• the average time it takes a packet to reach the destination and for the response to return to the source
• whether or not the destination device is reachable through the network

• the average time it takes each router in the path between source and destination to respond

2. What are three main types of high-bandwidth connection options used by medium- to large-sized businesses? (Choose three.)
• DSL
• cable modem
• Ethernet
• metro Ethernet
• T1
• T3


3. What is the maximum T1 transmission speed?
• 56 kbps
• 128 kbps
• 1.544 Mbps
• 2.4 Mbps

4. Which of the following start the test of destination reachability?
• echo request issued by source
• echo reply issued by source
• echo request issued by destination
• echo reply issued by destination

5. Which statement describes a function of a Tier 1 ISP?
• peers with other similarly sized ISPs to form the global Internet backbone
• uses the services of Tier 3 ISPs to connect to the global Internet backbone
• pays Tier 2 ISPs for transit services to connect across continents
• limits the offered services to small geographic areas

6. At which point do individuals and small businesses connect directly to the ISP network to obtain Internet access?
• at a POP
• at an IXP
• at a Metro Ethernet link
• on the ISP extranet

7. What information is contained in the numbered RFCs maintained by the IETF?
• the rules for acceptable use of websites and e-mail
• the descriptions of various hardware components that connect to the Internet
• the specifications and rules for how devices communicate over an IP network
• the standards for cabling and wiring for local Ethernet networks

8. Which network support services team is responsible for testing a new customer connection and for monitoring the ongoing operation of the link?"
• customer service
• help desk
• network operations
• on-site installation

9. Which network support services team identifies whether the client site has existing network hardware and circuits installed?
• customer service
• help desk
• network operations
• planning and provisioning

10. Which ISP network support systems team will typically contact the customer once a new circuit is ready and guide the customer in setting up passwords and other account information?
• help desk
• customer service
• network operations center
• on-site installation team
• planning and provisioning

11. What feature allows network devices to be scalable?
• a fixed number of interfaces
• ease of repair
• modularity
• low maintenance requirements
• low cost

12. Which command generated this output?
• 1 12.0.0.2 4 msec 4 msec 4 msec
• 2 23.0.0.3 20 msec 16 msec 16 msec
• 3 34.0.0.4 16 msec 18 msec 16 msec
• Router# traceroute 34.0.0.4
• Router# nslookup 34.0.0.4
• Router# ping 34.0.0.4
• Router# telnet 34.0.0.4

13. Which network utility helps determine the location of network problems and identifies routers that packets travel across?
• ping
• ipconfig
• traceroute
• ixp

14. What interconnects the Internet backbone?
• gateway routers
• IXPs
• POPs
• satellite dishes

15. What units are used to measure Internet bandwidth?
• bits per second
• bytes per second
• hertz
• megabytes per second
• packets per second

16. The IT manager of a medium-sized business wishes to house the company-owned web servers in a facility that offers round-the-clock controlled access, redundant power, and high-bandwidth Internet access. Which ISP service will fulfill this need?
• web hosting
• planning and provisioning
• application hosting
• equipment colocation
• Tier 1 ISP services

17. What is the purpose of an RFC?
• to provide the connection point for multiple ISPs to the Internet
• to document the development and approval of an Internet standard
• to connect a business to an ISP
• to provide data communication services to ISP customers
• to monitor network performance and connection status of ISP clients

18. When did the Internet become available for use by businesses and consumers?
• 1979
• 1984
• 1991
• 1999
• 2000

19. What was the original purpose of the Internet?
• voice communication
• marketing
• research
• commerce

20. What three support service teams are commonly found within an ISP? (Choose three.)
• help desk
• computer support
• application readiness
• network operations center
• planning and provisioning

• implementation and documentation